Overview of Dixin CPT Cones
Super strong bearing capacity Ultra high sensitivity Ultra high stability
1.Introduction to basic types of cones
|
NAME |
TYPE |
PARAMETERS |
RANGE |
|
Single-bridge Cone |
10cm2 |
Qc |
0-45 MPa |
|
15cm2 |
Qc |
0-60 MPa |
|
|
Double-bridge Cone |
10cm2 |
Qc,Fs |
0-45 MPa;0-450 kPa |
|
15cm2 |
Qc,Fs |
0-60MPa;0-600 kPa |
|
|
Cross Plate Probe |
Plate head 50*100mm/75*150mm |
0-60 kPa |
|
2.CPTU Cone
Cone for Pore Pressure(Qc,Fs,u)
Inclinometer Cone for Pore Pressure(Qc,Fs,u,Tilt)
|
SENSOR |
MAX RANGE |
RESOLUTION |
ERROR |
|
QC |
50-70 MPa(10cm2) 80MPa(15cm2) |
24 bit |
≦ 0.5 % |
|
FS |
800 kPa |
24 bit |
≦ 0.5 % |
|
U |
5000 kPa |
24 bit |
≦ 0.5 % |
|
TiLT |
0°-90° |
12 bit |
0.01° |
3.Digital Cone for Pore Pressure (Digital CPTU Cone)
4.Multi functional Cone：Wave Velocity + CPT(U) Cone
The SCPT (u) earthquake test is conducted during the traditional CPT (u) test, and the parameters of the right shear wave, left shear wave, and compression wave can be combined with the parameters obtained from CPT (u) testing, namely cone resistance (Qc), local friction (Fs), vertical deviation (i), and pore pressure (u).
The experiment adopts the single hole method, also known as the inspection layer method.
5.Digital Cone for Inclinometer
Measurement depth can reach up to 500 meters
Customized for African clients
Can be used for mineral exploration
The acquisition system, digital inclinometer cone, and signal lines are all independently developed.
High precision probe, customizable according to customer needs
